Portfolio

Parts I modelled as fully parametric templates: change one size and the rest follows. The sketches below are simplified views, not workshop drawings.

Spur gear, z = 18, m = 220° pressure angle, bore 8 with keyway

Slip-on flange, DN50 PN16D 165, PCD 125, 4 × Ø18 holes

Hex nut M24s = 36, m = 19, 30° chamfer both sides

Stepped shaft Ø30 / Ø40 / Ø32Keyway 10 × 8, chamfers 1 × 45°

Angle bracket 80 × 60Bent sheet, inner radius 3, two Ø9 holes

Flat washer, size 24d1 25, d2 44, h 4